2023 – Open Source Hardware Enterprise

Tesla Coil

Post author:Nathan Fisher, Joel Diccion
Post published:December 14, 2023
Post category:2023 Fall Semester Reports

Open Source Open Platform Tesla Coil Fall 2023 Joel Diccion – Electrical Engineering Nathan Fisher – Electrical Engineering Tom Powell - Electrical Engineering Dr. Shane Oberloier – Enterprise Advisor Michigan…

Capstone/Senior Design through OSHE

Post author:Kach Johnson
Post published:December 14, 2023
Post category:Helpful Guides

Getting Started To register for ENT4950 (and start pursuing capstone through OSHE) you will need to fill out this google form. After submitting, it will automatically be sent to your…

KeWee Energy Meters

Post author:Evan Grahs, Liam Cacioppo, Bill Matt, Caleb Jahncke
Post published:December 13, 2023
Post category:Project Overviews

The Team Past Members Description The KeWee Energy Meters project is all about designing a series of open-source power monitoring solutions. We design everything from the sensing hardware through the…

SHARK Laser tag Fall Semester Report

Post author:Evan Jablinskey, Ben Boelens, Cory Muehlmeier
Post published:December 11, 2023
Post category:2023 Fall Semester Reports

Intro Our project was to bring more arsenal options to the local laser tag venue. This was going to be based off of the MILES Tag 2 protocol which can…

Restruder – Fall 2023 Update

Post author:TJ Harikkala, Alex Nigrine, Lindsey Manhart
Post published:December 11, 2023
Post category:2023 Fall Semester Reports

Background The objective of our project is to design a 3D printer extrusion system to measure recycled filament diameter and automatically adjust feed rate to maintain consistent volumetric flow rate…

Localized Lyme Disease Fighting

Post author:Georgia Heintz, Lauren Dezelski (Hayes)
Post published:December 11, 2023
Post category:2023 Fall Semester Reports

Background In recent years, the number of reported Lyme disease cases in the Upper Peninsula of Michigan has increased [1]. The project Localized Lyme Disease Fighting was created with the…

ChocoFab Project Report – Fall 2023

Post author:Adam Sandahl, William Schober, Seth Carpenter, Liam Kane, Chase East
Post published:December 10, 2023
Post category:2023 Fall Semester Reports

Prepared by: Adam Sandahl, William Schober, Seth Carpenter, Liam Kane, Chase East About our Project: The Chocolate Bar Fabrication Assembly, or ChocoFab, is a powered chocolate bar processor that takes pure chocolate substances and…

ATX Power Supply – Fall 2023 Semester Report

Post author:Carson Belyk, Kach Johnson, Ben Keppers, Ben Abel, Leif Christensen
Post published:December 10, 2023
Post category:2023 Fall Semester Reports

Background The goal of this project is to create an Open-Source 600W computer power supply that meets commercial power supply standards. In our initial research for this project, we were…

Hibernacula Manipulation

Post author:Alex Riebe, Thomas Kinjorski, Mitchell Krueger, Ben Steinbach
Post published:December 10, 2023
Post category:2023 Fall Semester Reports

Prepared by: Thomas Kinjorski, Mitchell Krueger, Alex Riebe and Ben Steinbach Background and Vision: The MTU College of Forest Resources and Environmental Science (CFRES) in partnership with the Michigan DNR…

BREAD MOLD – Fall 2023 Report

Post author:Nic Cywinski, Nick Sandahl
Post published:December 10, 2023
Post category:2023 Fall Semester Reports

Nic Cywinski, Nick Sandahl DESCRIPTION and BACKGROUND The purpose of this project is to expand the Broadly Reconfigurable and Expandable Automation Device(BREAD) framework. The Mass Output and Logging Device(MOLD) is…

Test Modal