Georgia Heintz’s Work Log
9/17/23 - 9/23/23 Met with Dr. Brzeski and Dr. Wolfe of the Forestry Dept. and learned the following: White-footed mice are the species of mice in Michigan that are most…
Evan Jablinskey’s Worklog
currently working on recreating this circuit board in Autodesk eagle
Induction Heater – December 2022 Progress Report
Induction Heater Project Report Fall 2022 Kach Johnson Anders Smitterberg Project Overview The project started after OSHE was approached by the project sponsor. The sponsor informed OSHE of their current…
Recyclebot
About our Project: The Recyclebot is a 3D printing filament extruder device capable of converting plastic to 3-D printing filament. The purpose of this project is to help reduce plastic…
KeWee Energy Meters – December 2022 Report
About the Project The KeWee Energy Meters project aims to create a series of devices and software for home energy use monitoring. We hope to make affordable sensors and IoT…
Digital Logic Display
The goal of this project was to serve as both a demonstration and an interesting way to explain how a CPU works to people who don't have much experience in…
Open Source Open Platform Quadcopter
Open Source Open Platform Quadcopter Spring 2022-Fall 2022 Joaquin Ganoza – Mechanical Engineering Christopher Hettinger – Computer & Electrical Engineering Dr. Shane Oberloier – Enterprise Advisor Michigan Technological University Open…
Immersion Circulator
Fall 2022 Project Report Contributors:Lily Hubbard – Computer Engineering Ben Steinbach – Electrical Engineering Update 2023 This project has since been updated and is now complete, go to this link to find the new project!: What Is an Immersion Circulator? Why are they needed? What is an Immersion Circulator? Immersion Circulators are specialized devices that…
GrowBot
What is GrowBot? GrowBot is a proposed device that will be able to assist consumers with creating and maintaining small-scale gardens. The long-term goals of this project are for GrowBot…
3D Printing Automation Project
Introduction The main overall goal of the 3D Printing Automation team has been to create a process for continuous printing without the need for human intervention. The project was inspired…